Finally Made the Jump to All Grain!

The title says it all. I went with a cooler mash tun for batch sparging ala Denny Conn. I used a 70 quart Coleman Xtreme cooler, stainless braid, and ball valve for a 10 gallon setup. Pics are at the bottom. The first brew on my ghetto-fabulous rig was a Single Malt and Single Hop IPA (SMaSH). Here's the recipe:

24 lbs Weyermann Munich

1 oz Summit FWH

1 oz Summit @ 60 min

2 oz Summit @ 15 min

2 oz Summit @ flameout

1 oz Summit keghop (per keg)

US-05 yeast

Mashed at 150 for 60 minutes. I was shooting for an OG of 1.066 and 91 IBUs but ended up with only 1.048, putting my efficiency in the high 50s, not too good. Despite the low efficiency, the beer turned out really good! I think once I get a Barley Crusher and dial in my system I will rebrew this as a low gravity, highly hopped session beer. It's got tons of citrus (tangerine and grapefruit) hop flavor and aroma but thanks to the Munich base there's a solid malt background that still finishes dry. I really like this beer.

My second batch was another attempt at the smoked brown ale I brewed last November that was inspired by Red Hook Late Harvest. Although I got a different result with that brew, I ended up liking it a lot so I just modified the grain bill a bit (more rauchmalt, less roasted barley) and converted it to an AG recipe that looks like this:

20 lbs Rahr 2 row

3 lbs Weyermann Rauchmalt (beechwood smoked)

1 lb C60

.5 lb C120

.5 lb pale chocolate

.25 lb roasted barley

1.5 oz Magnum @ 60

2 oz Czech Saaz @ 15

US-05 yeast

I mashed this one at 150 as well. I was shooting for 1.068 on this but ended up with 1.056, so I did improve my efficiency slightly to 62%. I am really liking this beer as well. There's a hint of chocolate and coffee in there and the smoke is noticeable without being overwhelming, and there is just enough hop presence to balance everything out. I am quite happy with this beer as well.

Finally, I brewed a 10 gallon batch of Belgian Golden Strong. I mashed this one at 148 for 90 minutes and then did a 90 minute boil to drive off DMS because of the Belgian Pils malt. I split this batch between Wyeast 3864 (Unibroue) and Wyeast 3739 (Flanders Golden). Both of these strains were part of the VSS series. I pitched at 64 degrees and then ramped up over the next few days to about 80 degrees, which is where they sit right now. It's only been 2 weeks so I haven't taken a reading on these yet. Here's the recipe:

25 lbs Castle Pils

5 lbs table sugar

5 oz Czech Saaz @ 90

Pretty simple recipe! The actual OG on this one was 1.076 versus my target of 1.082, but my efficiency dropped back to the high 50s since I calculated this at 65%. Not sure what the deal is, since I double crushed the grain and thought I did a fairly good job measuring my volumes.

In other brewing news, I attended the AHA Rally at Surly Brewing with a couple of guys from RAZE back on October 10. Surly brewed what they called an Imperial Brown for the occasion and distributed 5 gallons of wort to over 300 homebrewers. In addition, we had the opportunity to drink free beer from Surly, including their freshly tapped Surly Wet, a wet-hopped IPA. I got to meet a bunch of guys from the Northern Brewer forum too which was icing on the cake. I just kegged this beer and so far it is tasting great. It was a big beer (OG 1.081) that I fermented with Wyeast 1214 Belgian Abbey yeast. I taste some dark fruit, alcohol warmth, and a little coffee and molasses. It will definitely get better with age.

Here's a few pics of the new AG setup:

Labor Day Update

Wow, haven't posted since July! Lots of beer adventures the second half of the summer, here they are in short form.

The kegerator is serving me nicely. The big July bash I threw definitely broke it in. We killed all 4 kegs of beer that night, so apparently a badminton tournament makes people thirsty. We also ate about 20 pounds of pulled pork the same day. Way to go team! I just recently upgraded to a 10 pound CO2 tank, so I should be able to go much longer without refills, although I managed to force carb and push 8 or 9 kegs, which makes me think I must have had a slow leak in my old setup.

Went to the Great Taste of the Midwest for the first time back in August and had an awesome time. Foley graciously hosted me so I got to benefit from his connections to the 3 Floyds and Bells crew the whole weekend. On top of that I got to see some old friends from high school, hang out with cousin Brian, and made some new friends as well. We started the festivities Friday night at the Capitol Chophouse with a 3 Floyds Brewing tasting dinner. This was probably one of the best meals I've eaten. The food was awesome and the beer pairings were perfect. After dinner we went to Maduro and had beers on the Bells crew. Got to talk to Larry Bell for a bit which was pretty cool. The next day we hit the fest. Highlights: not having to wait for Dark Lord at the 3 Floyds tent, Bells Golden Funk, the Real Ale tent, the list goes on and on. I had so many good beers there from so many different breweries. I left with tons of ideas for upcoming brews.

Entered my first contest, the Minnesota State Fair. I entered an American Pale and an Apricot Blonde in the Fruit category. As expected, I did not place the APA, but I actually came in second with my Apricot. Needless to say, I am pretty surprised. The fact that there were only 12 entries in that category probably helped quite a bit. I'm almost embarrassed that I won with a fruit beer because I only brew one a year when my raspberries come in, and this year I just decided to do a 10 gallon batch with raspberries in one half and apricots in the other after coming back from the Boundary Waters with a growler of Fitger's Apricot Ale. I entered just to get some feedback on the beers I had on hand, but they haven't sent scoresheets back unfortunately. I'll update when I get them.

The last 2 weeks of August we went to Colorado and managed to squeeze in some brewery visits. Our first stop was Fort Collins, so we had lunch at the Coopersmith Brewpub (awesome beer and food, good vibe), and then went to New Belgium for a tour. This is a great tour in an amazing brewhouse, take it if you ever got the chance. I got to sample La Folie right from the tanks, enough said. I picked up all of their Lips of Faith beers for the cellar too. After camping in Rocky Mountain National Park we cruised through Boulder and hit up Boulder Beer Company. I was severely disappointed. The people here were total pricks and not friendly at all. It got worse when we left there to hit the Avery Brewery and found out that the tap room is closed on Mondays. I almost cried. I felt much better when I found a liquor store and stocked up on all kinds of beer that I can't get here. Later on we hit up Wynkoop Brewpub in Denver, had an awesome meal and beer, and then went to the Falling Rock Taproom. This bar was absolutely amazing. I had Russian River's Blind Pig, RR Publication, then Duchesse de Bourgnone. I could've stayed there forever.

I'm hoping that coolers go on sale this week because I am planning on going all grain for my next batch. The plan is to go straight to 10 gallon batches. For my first batch I'm hoping to brew a SMaSH beer (Single Malt, Single Hop) with Munich and Summit. After that I think I'm going to do the AG version of my smokey fall beer from last year, and then probably a Belgian Golden Strong and ferment half with Unibroue yeast, and then the other half with Flanders Golden ale from Wyeast. I am also seriously considering going to the dark side and starting to brew some sour beers, but I need to figure out where I would store them. Someday....

The hop yard is doing really well, but I was plagued with aphids while we were in Colorado, so when I came back the Centennial and Zeus plants were pretty much overrun. I did manage to salvage a small amount of Centennial and even smaller amount of Zeus, but those 2 plants are pretty much wasted. Next year I am going to start treating as soon as the bines are up. For some reason my Cascade plant seems immune to aphids, so I have already harvested 1 pound (dry) and will probably be able to pull another half pound or more in the next week or so. It's a drag seeing all of those hops go to waste (I had at least a dry pound of Centennial and maybe even closer to 2 on the Zeus monster), but at least I know that I can grow them well in the garden. There's always next year.

It's Finally Done!

Well, here it is, the new kegerator. It began it's life as your basic 7.0 cubic foot white GE chest freezer. I spray painted the sides and top with appliance epoxy and the front with chalkboard paint. The collar is 2x10 douglas fir finished with stain and 4 coats of poly, 4 of the new Perlick forward seals with stainless steel shanks, and a fifth keg of root beer on the hump. I must say thanks to the Northern Brewer forum for all of the ideas over the last year or so since I started kegging and immediately started planning the upgrade, especially chriscose from the "Post pics of your kegerator" thread. If you check his out you'll see the influence. Had a big party on Saturday to properly break it in and we managed to kill 4 full kegs and 20 pounds of pulled pork. At about 11 pm I actually lifted up a primary of APA onto the collar and siphoned directly into an empty keg of IPA. That APA now has 1 ounce of Amarillo keg hops (from the other APA) and a half ounce of Simcoe and half ounce of Amarillo from the IPA.

It's Brewing Season

After a long time with no updates, I've got lots of brewing news. We're hosting a party on July 11 so I've been trying to brew like a madman. I've also scored a new 7 cubic foot chest freezer (thank you Craigslist!) so I need to get 5 or 6 beers kegged to fill it. Hopefully in the next few weeks I'll be purchasing a temp controller, 5 or 6 Perlick taps, a few more kegs, and a couple of CO2 distributors. I've got a double distributor so the plan is to run my beers off one 5 way distributor and then run a 3 way distributor off the other regulator so I can have a line for a higher carbed beer, a soda, and one for utility cleaning and purging.

Right now I've got a Saison from the AHA Big Brew that I split with my friend Ryan from the RAZE homebrew club. I think I posted the Saison recipe already. I fermented this with WLP565, but had to finish it with US-05 because I couldn't get it below 1.016. After pitching the US-05 it dropped to 1.012. I was worried that it would finish too sweet but it still tastes fairly dry. It's been in the keg a couple of weeks now and it's coming around. Appearance wise it's straw colored, a little cloudy, and has a nice fluffy white head that sticks around for a while and leaves nice lacing. Aroma is yeast and mild pepper and fruit. It has a nice light body, despite the almost 6% ABV, nicely balanced bitterness, and a good mix of fruit and spice. Overall, pretty tasty, but I like Ryan's version a little better that he fermented with the French Saison strain from Wyeast.

I also kegged half of the 10 gallon batch of Hoppin Mad IPA that I brewed on Memorial Day. This beer is fresh, hoppy, and awesome! Here's the recipe for a 10 gallon batch:

• 1 lb C60
• .5 lb C120
• .5 lb Vienna
• 13 lbs Briess Golden Light DME
• 1 lb sugar
• 1.5 oz Warror at 60
• .5 oz Warrior/1 oz Simcoe/1 oz Amarillo at 15
• 1.5 oz Simcoe/1.5 oz Amarillo at 5
• 1.5 oz Simcoe/1.5 oz Amarillo at flameout
• .5 oz Simcoe/.5 oz Amarillo keghop

I brewed 10 gallons of Patersbier on Thursday morning that is now bubbling over thanks to the healthy repitch of Wyeast 3787 that I harvested from the cake of the first version of this beer. That brings my 2009 total to 70 gallons so far, which will hit 80 when I brew 10 gallons of APA with a mix of Centennial and Cascade sometime next week.

I also got the chance on Tuesday to help Tod Fyten of Mantorville Brewing Company brew a batch of Stagecoach Amber Ale. I met Tod when RAZE toured his brewery a couple of months ago. He mentioned increasing production over the summer and I volunteered to help, which I'm hoping to do once a week for the rest of the summer if we can get our schedules to match. Tod's a cool guy with many years of experience in the craft brewing industry and tons of connections, so listening to his stories was a good time, and it was really interesting to see the differences and similarities between the commercial and the homebrew process. There's definitely some homebrewer's ingenuity happening there. Plus, seeing 7 or 8 sacks of malt in a mash tun that wasn't even half full, 128(?) gallons of beer in the kettle, and giant bags of hops in the freezer was a pretty cool experience and definitely gave me the itch. Ten gallons just doesn't seem big enough now!

Man Down

Where did the last 2 weekends go and why did I not brew?  Kristen went to plant the big garden in Red Wing today and declared my Saaz and Horizon rhizomes dead, but she harvested a Cascade and a Centennial rhizome to put in the extra 2 mounds, so it would be nice to get a little extra production.  My new hop count is 2 Cascade, 2 Centennial and 1 Zeus.  The original 3 plants are all around 4 feet and growing strong.  While she was there, I finally knocked out a 10 gallon batch of IPA.  I went off of the grain bill for last summer's short lived Simcoe IPA (which only lasted 13 days in the keg) which was based on Tasty McDole's IPA on the Jamil Show.  The hop schedule was inspired by Surly Furious.  Here's the recipe:

• 1 lb Caramel 60
• .5 lb Caramel 120
• .5 lb Vienna
• 13 lbs DME
• 1 lb cane sugar
• 1.5 oz Warrior (60 min)
• .5 oz Warrior (15 min)
• 1 oz Simcoe (15 min)
• 1 oz Amarillo (15 min)
• 1.5 oz Simcoe (5 min)
• 1.5 oz Amarillo (5 min)
• 1.5 oz Simcoe (flameout)
• 1.5 oz Amarillo (flameout)
• 1 oz Simcoe (dryhop)
• 1 oz Amarillo (dryhop)

I definitely put a dent in last weekend's birthday present to myself of a 50 pound bag of Briess Golden Light DME and 2 pounds of Simcoe, Summit, Amarillo and Centennial.  I've used the Simcoe and Amarillo combo before so I'm super excited about this one.  I'm going to dry hop with a half ounce of Simcoe and a half ounce of Amarillo, but I may do it differently when the time comes.  The OG was 1.066 and comes in at 79 IBUs.

On deck for next weekend (hopefully) is a 10 gallon batch of Patersbier for the summer.  That will make a great lawnmower beer.  Anybody else get some brewing done this weekend?

What a Weekend!

I had Friday and Monday off so I decided to get some brewing chores done.

• On Friday I cleaned and sanitized 2 kegs, kegged my Patersbier, harvested the yeast from the Patersbier for a tripel I'll brew sometime, and built a 50 foot immersion chiller for less than 50 bucks.  Copper has gotten really cheap!
• I spent Saturday and Sunday putting up the new hop towers, transplanting my Cascade, Centennial, and Zeus, and planting my new Saaz and Horizon rhizomes.  I used PVC for the towers, one tower per plant.  I sank a 5 foot section of 2 inch PVC into the ground, then put a 10 foot 1.5 inch pipe inside the 2 incher.  That gave me 7 feet above ground, so I added another 5 feet to get a total of 12.  Not super high, but good enough.  It does sway a little, but hopefully they'll stay standing in the wind.  I went with the individual towers because I thought this would be the easiest way to keep the different varieties separate.
• On Monday morning I brewed my first 10 gallon batch, an APA.  Getting 12 gallons of wort to boil didn't take as long as anticipated, and I chilled to 52 in 25 minutes with my new ugly chiller (a little too cold!), but siphoning was a pain.  My burner stand isn't high enough to get a good siphon going so the large amount of pellet and whole hops kept stopping the siphon.  I'm going to get some concrete blocks to elevate my rig a little for next time.  I'm also looking into installing a ball valve, pickup tube, and thermometer.  Ten gallons took me about 4 and a half hours from dragging out my gear to putting everything away, but the siphoning and racking to primary took a half hour!
  

Pics:

Is It Spring Yet?

Since I haven't posted in awhile, here's a quick rundown of what I've been up to beerwise.

• Kicked the Oatmeal Stout keg.  Overall this was a nice beer.  Good roasted barley character, a little toasted flavor, and a nice and smooth mouthfeel.  May have been just a bit too bitter, so I'll probably use a little less at 60 minutes.  While I enjoyed drinking this beer, I got a little sick of it by the end.  Not a real session beer.
• Brewed the Double IPA with almost 2 ounces of Warrior at 60 to bitter.  I split 2 ounces of Simcoe and 2 ounces of Summit into three piles and added each pile at 15, 5, and flameout.  I was going to use the yeast cake from the VSS Imperial Blend but the starter beer I brewed and attempted to FWH for the first time, did it wrong, and mistreated the yeast somehow so it tasted too estery.  I just pitched 2 packets of US05 instead.  This beer did finish too sweet, so next time I'll use more sugar instead of malt to get it dryer, but it tasted drier than it measured.  At 10% ABV and 125 IBUs, this beer is really deceiving and dangerously drinkable.
• Brewed a Patersbier with Wyeast 3787 and all Saaz hops.  I'm hoping to use the yeast cake for a tripel in a month or so.
• I have converted my keg into a kettle, but I still need to clean it up and do a test run.  I'm not real confident in how fast I'll be able to boil with my current burner.  I think that I'll also probably need to build a new immersion chiller for 10 gallon batches, which reminds me that I need to do that soon since I'm having a Big Brew Day club event and was going to split a batch of Saison with a friend.  I'm thinking about giving the Brew in a Bag all grain method a try this summer once I finish the upgrade.
• Last Saturday the RAZE club toured the Mantorville Brewing Company.  The owner, Tod Fyten, started as a homebrewer and gave us the full on beer geek version of the tour.  It was awesome!  He really had a lot of insight into the history of beer and brewing, especially in Minnesota, and also gave us a detailed talk of his brewing process.  We finished it off with some samples of his Maple Ale, Blonde, and Smoked Porter.  I got a growler of the Smoked Porter and had no problem finishing it. 

This weekend the club is meeting at a member's house to get rhizomes, but it's been pretty cold here lately so I think we might get frozen out.  I'd like to get the keggle cleaned up and do a test boil at some point too.  At some point I need to brew again too, probably an APA.